Concrete moisture meter SM-842 in Bangladesh

The concrete moisture meter is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the concrete moisture meter are pressed onto the surface to be tested. Within seconds, the concrete moisture meter will show the moisture content to the operator.

Application

This moisture meter is designed for testing moisture levels in wood and building materials. Combined the microcontroller technique and integrated characteristics for 4 material groups Increase the accuracy of measurements. It is widely used for measuring the moisture level in a rough professional environment.

Features

• Use on woods, bamboo, paper, wood fibre articles, and building materials
• Big LCD display with backlight
• Replaceable electrode pins
• 2-in-1 Digital LCD readout and analogue bar graph
• Simultaneous measurement and display of moisture & temperature readings
• Materials selection measurements
• MAX/MIN/DATA Hold
• Auto power off

Digital Moisture Tester – Wood & Building Material Moisture Meter

Digital Moisture Tester with Temperature Measurement

This Digital Moisture Tester is a handheld device used to check the moisture level of wood and building materials. It has a large LCD display with backlight, replaceable electrode pins, and shows moisture and temperature at the same time.

The meter is easy to use and suitable for checking moisture in different materials. It also provides a digital reading along with an analog bar for quick visual checking.

Key Features

* Large LCD display with backlight
* Measures moisture and temperature together
* Suitable for wood and building materials
* Replaceable electrode pins
* Digital value and analog bar display
* Different material measurement options
* Automatic power-off after about 2 minutes
* Temperature displayed in °C and °F
* Easy-to-use handheld design

Technical Specifications Wood and Building Moisture Meter

Specification Details

• Moisture Range – Wood 5% to 70%
• Moisture Range – Building Materials 0.1% to 2.4%
• Temperature Range -20°C to 70°C / -4°F to 158°F
• Wood Accuracy: 5%–30% ±1%
• Wood Accuracy: 30%–60% ±2%
• Wood Accuracy: 60%–70% ±4%
• Other Materials Accuracy ±0.5%
• Temperature Accuracy ±1.5°C / ±2.7°F
• Operating Temperature 0°C to 50°C / 32°F to 122°F
• Electrode Length 10 mm
• Electrode Type Replaceable
• Ambient Humidity 0% to 85% RH
• Display LCD with backlight
• Display Type Digital value + analog bar
• Auto Power Off About 2 minutes

Where Can It Be Used?

This moisture tester is useful for checking moisture levels in:

* Wooden materials
* Timber and boards
* Construction materials
* Building materials
* Furniture and woodworking
* Material inspection
* General moisture checking applications

Why Choose This Moisture Meter?

It provides a quick and easy way to check moisture levels without complicated operation. The large backlit LCD makes the reading easy to see, while the replaceable electrode pins help make the meter convenient for regular use.

Note: Accuracy depends on the material being tested and the moisture range. Always follow the manufacturer’s recommended testing procedure for the best results.

Operating Instruction:

7.1 Open the battery cover and install a 9V battery (battery type: 006P or NEDA1604 or IEC6F22) in the Battery Compartment.

Remove the protective cap to expose the electrode pins, carefully push the electrode pins as far as possible into the materials under test. Take several readings in several locations on the material for the best representation of the amount of moisture present. The measured values will be displayed on the LCD