- Garments Cutting Machine
- Plotting Inkjet Machine
- Plotting Cutting Machine
- Straight Knife Cloth Cutting
- Round Cloth Cutting Machine
- Band Knife Cutting Machine
- End Cutter Machine
- Tape Cutter Velcro Cutter
- Fabric Drill Machine
- Fabric Cutting Machine
- Cordless Cutter Machine
- Laser Cutting Machine
- Numbering Machine
- Cutting Machine Accessories
- Industrial Sewing Machine
- Lockstitch Sewing Machine
- Chain Stitch Sewing Machine
- Hand Stitch Sewing Machine
- Blind Stitch Sewing Machine
- Hemstitch Picoting Sewing Machine
- Overlock Sewing Machine
- Interlock Sewing Machine
- Multi-needle Sewing Machine
- Button Attaching Sewing Machine
- Bar Tacking Sewing Machine
- Button Holder Sewing Machine
- Zigzag Sewing Machine
- Heavy-duty Sewing Machine
- Garments Finishing Equipment
- Steam Iron
- Portable Steam Generator Boiler
- Vacuum Ironing Table
- Iron Table foam
- Compact Fusing Press Machine
- Straight Linear Fusing Press Machine
- Heat Press Machine
- Thread Thrum Sucking Machine
- Needle Detector Machine
- Plastic Staple Attacher Machine
- Button Attaching Machine
- Fabric Inspection Machine
- Parts & Accessories
Shop
SDC BHT Free Polythene Film (63 Microns)
৳ 1.004222 BHT-Free 63 Micron Film – 400 × 200 mm, 100-Pack The 4222 BHT-Free Film is a high-quality, 63-micron thick film designed for professional testing and laboratory applications. Supplied in a 400 × 200 mm size and 100-piece pack, it meets the standards specified in BS EN ISO X18, M&S C20B, and Next TM43, ensuring consistent performance and reliability in use.
SDC Humidity Test Control Fabric 25cm x 15cm
৳ 1.00SDC Humidity Control Fabric The Humidity Control Fabric is an azoic-dyed cotton fabric with controlled fading properties that vary according to relative humidity. It is used as a calibration tool for light fastness testing, ensuring that when a testing machine is correctly set, the fabric fades at the same rate as Blue Wool Standard Number 5.Each humidity control fabric is supplied with a printed instruction sheet, providing guidance for setting up the ISO 105 B series light fastness tests accurately and consistently.
SDC Blue Wool Light Fastness Standard (No. 1–8)
৳ 1.00SDCE Light Fastness Standards – Blue Wool 1 to 8 (15 × 25 cm) The SDCE Light Fastness Standards consist of a set of eight wool fabrics dyed with specific blue dyes, providing a range from very low to very high light fastness. Each standard is numbered 1 to 8, where 1 represents the poorest light fastness and 8 the highest, allowing precise grading of fabrics using the Grey Scale for Colour Change. These standards are essential for predicting the suitability of textiles for end-use applications.
Typically, apparel requires a minimum grade of 4, while furnishings often require grade 6. They are used in the ISO 105 B series of tests and can be combined with the Humidity Control Fabric for calibration of light fastness testing machines. To improve grading accuracy, we also supply mounted cards specially prepared without optical brightening agents, ensuring that the background does not influence the perceived colour of the samples.
SDC Nickel Detection Kit (200 Tests)
৳ 1.00Nickel Ion Test Swab – Rapid In-House Screening for Skin SafetyCertain nickel-containing materials can release nickel ions, which, upon prolonged direct contact, may cause skin sensitisation and trigger allergic contact dermatitis. According to BS EN 1811:1998+A1:2008, nickel is the most common cause of contact allergy in Europe. This test has been specifically designed as a quick in-house swab test to detect the presence of nickel ions in components that are intended for direct and prolonged contact with skin, allowing manufacturers and quality control teams to ensure product safety efficiently.
SDC Stainless Steel Washing Balls (50 Pcs Pack)
৳ 1.00SDCE Stainless Steel Balls Crafted from non-corrodible stainless steel, these precision-made balls measure approximately 6 mm in diameter and are used as agitators in various washing tests within the ISO 105 C Series. They introduce a gentle abrasive action during domestic and commercial laundering simulations, ensuring realistic test conditions and reliable results.SDCE Stainless Steel Discs Manufactured from the same high-grade stainless steel, these smooth, burr-free discs are designed for use as agitators in dry-cleaning tests (ISO 105-D01). Their durable and corrosion-resistant construction guarantees long-lasting performance and consistency in laboratory testing environments.
SDC 100% Polyester Core Spun Thread
৳ 1.00The 4182 Polyester Core Spun Thread is designed for use in the preparation of test samples, ensuring consistency and reliability in textile testing applications. Manufactured to meet the requirements of BS EN ISO 13936, M&S P12, and AS 2001 2.21, this high-quality thread features a 74 ± 5 Tex specification and is supplied on 5000 m cones for convenient use in laboratory and quality control environments.
SDC Polyester Ballast 30cm × 30cm
৳ 1.00The 4110 Polyester Ballast is designed to ensure that wash loads used in garment testing maintain the correct weight, closely replicating the conditions of domestic washing machines. It provides consistent and reliable results during textile and garment washing evaluations. Manufactured according to ISO 26330:1994 and IWS Test Methods, it meets the rigorous standards required for professional testing applications.
SUJA GLOBAL Thread Trimmer Machine – Double Core Components
৳ 35,000.00National Scientific Corporation proudly offers the advanced SUJA GLOBAL Thread Trimmer Machine in Bangladesh. Designed for apparel, garments, and clothing industries, this high-performance machine delivers fast, smooth, and efficient thread trimming with powerful double core motor technology, low maintenance operation, and durable industrial performance.
SDC Polyester Ballast 20cm x 20cm
৳ 1.00The 4105 Polyester Ballast is used to ensure that wash loads in garment testing have the appropriate weight, closely simulating the conditions of domestic washing machines. This standard ballast helps achieve consistent and reliable results in textile and garment washing tests. Manufactured in accordance with BS EN ISO 6330:2012 (Type III) and M&S Methods, it meets the precise requirements for professional testing applications.
SDC Grey Scale
৳ 1.00This scale is specifically used to assess staining on adjacent undyed fabrics during fastness tests, following the procedures outlined in ISO 105-A03, and ensures accurate evaluation of textile performance under test conditions.
SDC Rubbing Fabric
৳ 1.00The ISO 105-F09 fabric is specifically designed for testing the wet and dry rubbing fastness of textiles, as well as for ISO 105-X12 and shower resistance tests. It ensures consistent and reliable results for professional textile testing applications. This testing fabric is available in versatile formats to suit your needs: by the meter, in 5-metre packs, or as pre-cut pieces measuring 5 cm × 5 cm.
SDC Multifibre DW 10 Meter Roll
৳ 1.00Developed by the Society of Dyers & Colourists (SDC) in 1986, the SDC Multifibre DW is a premium testing fabric designed for precise evaluation of colour fastness. Comprising six carefully selected fibre components—Acetate, Cotton, Nylon, Polyester, Acrylic, and Wool—this fabric is suitable as an adjacent fabric in a wide range of ISO 105 C Series and E Series colour fastness tests and meets the stringent requirements of chain store fastness specifications.
SDC Multifibre LyoW (10 Meter Roll) Available in Bangladesh
৳ 1.00Manufactured to exacting standards, Multifibre LyoW® undergoes rigorous quality control in independent UKAS-accredited laboratories, including evaluation of individual yarns prior to construction and thorough testing of the finished fabric. Only batches that meet all conformity standards are released for sale, ensuring reliability and consistency for professional testing.
Button Pull Test Calibration Weight 15LB (STA-0004)
৳ 1.00The Button Pull Test Calibration Weight 15LB (STA-0004) is a high-precision reference weight designed for ensuring the accuracy of test equipment used in textile laboratories and industrial quality control environments. It is specially used for button pull testing machines and other force measurement devices where exact calibration is essential for maintaining compliance with international safety and performance standards.
Button Pull Test Lower Fabric Clamp (STA-0042)
৳ 1.00The Button Pull Test Lower Fabric Clamp (STA-0042) is a professionally engineered textile testing accessory designed to secure fabric samples firmly during pull tests, tensile assessments, and other mechanical fabric evaluations. Built for performance and stability, this clamp ensures sample alignment and prevents slippage, which is crucial for maintaining test accuracy and repeatability in laboratory environments.