Textile Lab Consumables in Bangladesh | National Scientific Corporation is a trusted importer and supplier of ready stock textile lab consumable products in Bangladesh, serving textile mills, dyeing factories, quality control labs, universities, and research institutions across the country.

We provide a complete range of textile laboratory consumables required for testing, analysis, quality control, and research in the textile and garments industry. Our products ensure accurate results, reliable performance, and international testing standards compliance.

Our textile lab consumables category includes all essential materials and tools used in modern textile laboratories, such as testing instruments, chemicals, reagents, standard fabrics, lab glassware, sample preparation tools, color measurement accessories, cleaning supplies, documentation materials, safety equipment, and calibration standards.

From fabric testing and dyeing analysis to color fastness and physical property evaluation, we supply everything needed to maintain a fully functional textile testing lab. All products are sourced from reliable global manufacturers and kept in ready stock for fast delivery across Bangladesh.

SDC BHT Free Polythene Film (63 Microns)

৳ 1.00

4222 BHT-Free 63 Micron Film – 400 × 200 mm, 100-Pack The 4222 BHT-Free Film is a high-quality, 63-micron thick film designed for professional testing and laboratory applications. Supplied in a 400 × 200 mm size and 100-piece pack, it meets the standards specified in BS EN ISO X18M&S C20B, and Next TM43, ensuring consistent performance and reliability in use.

SDC Humidity Test Control Fabric 25cm x 15cm

৳ 1.00

SDC Humidity Control Fabric The Humidity Control Fabric is an azoic-dyed cotton fabric with controlled fading properties that vary according to relative humidity. It is used as a calibration tool for light fastness testing, ensuring that when a testing machine is correctly set, the fabric fades at the same rate as Blue Wool Standard Number 5.Each humidity control fabric is supplied with a printed instruction sheet, providing guidance for setting up the ISO 105 B series light fastness tests accurately and consistently.

SDC Blue Wool Light Fastness Standard (No. 1–8)

৳ 1.00

SDCE Light Fastness Standards – Blue Wool 1 to 8 (15 × 25 cm) The SDCE Light Fastness Standards consist of a set of eight wool fabrics dyed with specific blue dyes, providing a range from very low to very high light fastness. Each standard is numbered 1 to 8, where 1 represents the poorest light fastness and 8 the highest, allowing precise grading of fabrics using the Grey Scale for Colour Change. These standards are essential for predicting the suitability of textiles for end-use applications.

Typically, apparel requires a minimum grade of 4, while furnishings often require grade 6. They are used in the ISO 105 B series of tests and can be combined with the Humidity Control Fabric for calibration of light fastness testing machines. To improve grading accuracy, we also supply mounted cards specially prepared without optical brightening agents, ensuring that the background does not influence the perceived colour of the samples.

SDC Nickel Detection Kit (200 Tests)

৳ 1.00

Nickel Ion Test Swab – Rapid In-House Screening for Skin SafetyCertain nickel-containing materials can release nickel ions, which, upon prolonged direct contact, may cause skin sensitisation and trigger allergic contact dermatitis. According to BS EN 1811:1998+A1:2008, nickel is the most common cause of contact allergy in Europe. This test has been specifically designed as a quick in-house swab test to detect the presence of nickel ions in components that are intended for direct and prolonged contact with skin, allowing manufacturers and quality control teams to ensure product safety efficiently.

SDC Stainless Steel Washing Balls (50 Pcs Pack)

৳ 1.00

SDCE Stainless Steel Balls Crafted from non-corrodible stainless steel, these precision-made balls measure approximately 6 mm in diameter and are used as agitators in various washing tests within the ISO 105 C Series. They introduce a gentle abrasive action during domestic and commercial laundering simulations, ensuring realistic test conditions and reliable results.SDCE Stainless Steel Discs Manufactured from the same high-grade stainless steel, these smooth, burr-free discs are designed for use as agitators in dry-cleaning tests (ISO 105-D01). Their durable and corrosion-resistant construction guarantees long-lasting performance and consistency in laboratory testing environments.

SDC 100% Polyester Core Spun Thread

৳ 1.00

The 4182 Polyester Core Spun Thread is designed for use in the preparation of test samples, ensuring consistency and reliability in textile testing applications. Manufactured to meet the requirements of BS EN ISO 13936M&S P12, and AS 2001 2.21, this high-quality thread features a 74 ± 5 Tex specification and is supplied on 5000 m cones for convenient use in laboratory and quality control environments.

SDC Polyester Ballast 30cm × 30cm

৳ 1.00

The 4110 Polyester Ballast is designed to ensure that wash loads used in garment testing maintain the correct weight, closely replicating the conditions of domestic washing machines. It provides consistent and reliable results during textile and garment washing evaluations. Manufactured according to ISO 26330:1994 and IWS Test Methods, it meets the rigorous standards required for professional testing applications.

SDC Polyester Ballast 20cm x 20cm

৳ 1.00

The 4105 Polyester Ballast is used to ensure that wash loads in garment testing have the appropriate weight, closely simulating the conditions of domestic washing machines. This standard ballast helps achieve consistent and reliable results in textile and garment washing tests. Manufactured in accordance with BS EN ISO 6330:2012 (Type III) and M&S Methods, it meets the precise requirements for professional testing applications.

SDC Grey Scale

৳ 1.00

This scale is specifically used to assess staining on adjacent undyed fabrics during fastness tests, following the procedures outlined in ISO 105-A03, and ensures accurate evaluation of textile performance under test conditions.

SDC Rubbing Fabric

৳ 1.00

The ISO 105-F09 fabric is specifically designed for testing the wet and dry rubbing fastness of textiles, as well as for ISO 105-X12 and shower resistance tests. It ensures consistent and reliable results for professional textile testing applications. This testing fabric is available in versatile formats to suit your needs: by the meter, in 5-metre packs, or as pre-cut pieces measuring 5 cm × 5 cm.

SDC Multifibre DW 10 Meter Roll

৳ 1.00

Developed by the Society of Dyers & Colourists (SDC) in 1986, the SDC Multifibre DW is a premium testing fabric designed for precise evaluation of colour fastness. Comprising six carefully selected fibre components—Acetate, Cotton, Nylon, Polyester, Acrylic, and Wool—this fabric is suitable as an adjacent fabric in a wide range of ISO 105 C Series and E Series colour fastness tests and meets the stringent requirements of chain store fastness specifications.

SDC Multifibre LyoW (10 Meter Roll) Available in Bangladesh

৳ 1.00

Manufactured to exacting standards, Multifibre LyoW® undergoes rigorous quality control in independent UKAS-accredited laboratories, including evaluation of individual yarns prior to construction and thorough testing of the finished fabric. Only batches that meet all conformity standards are released for sale, ensuring reliability and consistency for professional testing.

Standard Reference WOB & OB Detergent 10Kg

৳ 25,000.00

The WOB & OB Detergent 10Kg provides a balanced cleaning. Its 10 kg bulk size reduces the need for frequent repurchases and helps keep pantry space tidy. The detergent works at temperatures, so you can save energy while still removing stains. It is a plenty of suds without leaving residue, which means clothes feel soft after each wash. The sturdy resealable bag protects the product from moisture, and the packaging includes a measuring cap for easy dosing.

Standard Reference WOB & OB Detergent 900g

৳ 3,000.00

This Standard Reference WOB & OB Detergent 900g offers a concentrated cleaning formula designed for laboratory glassware and metal components. The 900‑gram pouch provides enough supply for routine batch cleaning while keeping waste low. Its balanced surfactant blend works at moderate temperatures to remove residues without damaging surfaces.

5Kg OMO Detergent Powder

৳ 13,000.00

This 5kg OMO Active Laundry Powder is designed for both top-load and front-load washing machines. It is capable of removing tough stains like oil, grease, mud, and chocolate from fabrics and is specially formulated with a built-in pre-treater. It contains enough detergent to wash 113 separate loads of laundry.

With a strong commitment to quality and service, National Scientific Corporation supports the textile industry by providing dependable lab solutions that help ensure product quality, compliance, and efficiency.

⭐ Importer & Supplier of Textile Lab Consumables
⭐ Ready Stock Delivery All Over Bangladesh
⭐ Trusted Partner for Textile Testing Laboratories

Upgrade your textile lab with reliable consumables and professional-grade testing solutions from National Scientific Corporation.